Daily maintenance management of hardware stamping dies
Release time:
Aug 31,2022
The first is the cleaning and inspection requirements of centrifugal pumps. Proper cleaning helps maintain the life of the pump and reduces unnecessary losses. Taking the stainless steel centrifugal pump as an example, the pump cannot be disassembled at will during the warranty period, and only the surface contaminants can be cleared; when the time exceeds the warranty period, the first thing to understand about the stainless steel centrifugal pump is that the end surface of the stainless steel centrifugal pump cannot be scratched or scratched during the cleaning process. Scratches, once washed with clean water, immediately apply lubricating oil on the surface of parts and equipment to ensure that it will not cause rust; the second is that the vertical mid-section of the pump casing cannot be disassembled, and cleaning should be avoided as much as possible; the third is the impeller Components and cooling water pipes must be cleaned.
The second is the alignment requirements for stainless steel pipeline pumps. First, it is required that the drive shaft and the pump shaft, the drive shaft and the transmission shaft should be connected in accordance with the regulations. If there is no connection standard during the purchase period, Zhao Zheng must be familiar with the "Mechanical Equipment Installation Engineering Construction and Acceptance General" before. Specifications, and use it as a reference material is strictly required. These alignment requirements are all data generated through repeated experiments, and no one should change them at will.
Previous
Previous
Address
1F, Building E, No. 171, Qianjin 4 Road, Tanzhou Town, Zhongshan City
Copyright © 2022 Zhongshan EMEANER Intelligent Equipment Co.Ltd.